Roof area inspection
When included, an inspector records the roof structure, supports and fixings, including visible condition issues such as corrosion or leaks. Complete the pre-inspection checklist before a visit is booked.
Engineering services
View all servicesCertification and clear pricing for installers. Roof assessments for building owners.
Commercial solar installersBuilding & portfolio ownersResidential solarProduct certificationGround-mount solarSolar Verified · after installationMore Solar Ready servicesPricing calculatorDesign and certification around your product, its loads and intended use.
Skid base designLifting certificationCustom steel structuresTelecom foundation designPortable cabinetsLight-gauge steel designPricing and scopeEngineering advice for safe, correct installation of products and equipment.
Equipment installationsBrackets and fixingsSupporting structuresProduct and site assessmentPricing and scopeProject information checklistInstallation guideNot sure where to start?
Start your projectProjects by service
View all projectsFor building owners, councils, property trusts and aged care providers. Get structural advice before comparing solar proposals or expanding an existing system.
Assess the building before committing to solar. We review the roof structure, proposed panel loads and fixing requirements, and identify constraints or further work within the agreed scope.
When included, an inspector records the roof structure, supports and fixings, including visible condition issues such as corrosion or leaks. Complete the pre-inspection checklist before a visit is booked.
Findings on the roof’s ability to support the solar loads being considered, with structural limits and any further investigation or design identified.
Assessed structural requirements to include in tender briefs and share with prospective solar installers.
The structural certificate or applicable compliance document confirmed in your quote, such as Reg 126, Form 15 or PS1 where relevant.
Solar adds weight and wind loads to the roof and its connections. The assessment considers the structure and available site information before a layout is finalised.
Tell us about corrosion, leaks, roof membranes and warranty conditions. Structural assessment does not replace advice from the roof manufacturer or insurer; confirm their requirements for your project.
Pallets place concentrated loads on the roof during installation. If a pallet-load assessment is needed, agree it separately so assessed weights, storage areas and support requirements can be documented.
For tenders: include the assessed structural requirements in the brief and ask installers to explain how their proposed system will meet them. Confirm the mounting certification, pallet-load assessment and any completed-installation review included in the scope.
For portfolios: share the site list, available records and priorities. Gamcorp can scope assessments across multiple buildings before you commit to a rollout.
Discuss a building or portfolio assessmentUse the published price bands to estimate the selected services. Enter roof area for each building and select the work you need.
For ground mount, carports or other arrangements, send the proposal so Gamcorp can confirm the scope and price.
Open pricing calculatorGamcorp confirms the scope, exclusions and quote before work proceeds.
Rates per building, based on roof area. The table uses the same rates as the Solar Ready calculator.
| Service | Up to 499 m² | Over 499 to 999 m² | Over 999 to 1999 m² | Over 1999 to 2499 m² |
|---|---|---|---|---|
| Roof inspection | $950 | $1,650 | $1,650 | $2,600 |
| Structural roof assessment certification | $950 | $1,500 | $2,100 | $2,800 |
Design compliance certification: $500 once per site when selected with another service.
For portfolios or buildings above 2,499 m², ask Gamcorp to confirm a separate scope and price.
Roof sheet testing and assessed pallet loads gave the project team building-specific installation requirements.
Read the projectStructural findings and certification helped plan solar across 42 assessed New Zealand sites, including 24 schools.
Read the projectYou receive a scope and quote identifying the records, inspection and assessment needed.
You receive roof findings and requirements to brief installers and compare solar proposals.
You receive the certification and installation requirements agreed for the proposed system.
The scope, fee, required information and delivery timing are agreed before engineering work proceeds. Documents apply to the assessed arrangement and conditions.
Missing a drawing or detail? Tell us what is available so we can identify the next information needed.
Share your project stage, the decision you need to make and your required timing.
Start your project